LED lights have become popular throughout the world and continues to fill the market. LED
lights are the most economical use of electricity, thus bulb life 25 times longer than incandescent bulbs. Lamps are safe because they do not exist vennogo-heating, no spurious, poisonous materials are not used-ly. Easily installed in an electrical circuit. The level of brightness of LED lamps is constantly growing, thanks to the development, thereby LED lamps can be used as the primary light source.
LED lamp socket E27:
LED flood light bulbs with E27 base are used as sources of light power LEDs from 3 to 17 Tues Are analogous to halogen lamps E27 directional lighting, but have a distinctive feature, such as long life (minimum of 20,000 hours), high luminous efficiency and a decrease Niemi pollution. LED lamps are used for this series aktsentratsii light and light-tion sites.
LED lamps with E14 cap:
LED lamps with E14 socket creation-HN to replace conventional incandescent lamps
with socket E14. The difference from conventional lamps, these lamps are not heated, have a longer lifetime (40,000 hours) and very low power consumption of 3 to 12 watts. At the same time in power, they are not inferior to 25-40 watt incandescent lamps, of. Norton Lamps have a corps of three colors: black, metallic, gold, and the flask: transparent and opaque. That lets the lamps to choose virtually any existing chandelier.
LED lamps with base GU5.3:
LED lamps with base GU5.3 use very efficient light-emitting diodes from 2 to 6 5 watts. Can replace traditional halogen lamps MR16, which are located in homes and offices today, as they have an exceptionally strong long-lasting (at least 20 000 hours), you sokoy-light output. These LED lamps have a very wide range of application, including for display lighting and decorative lighting.
LED lamps with base GU10:
LED lamps based on light-emitting diodes with base GU10, housing MR16, are cost-effective replacement of fluorescent lamps. Have low energy consumptiontion, a high resistance to mechanical impact anyone. The service life of 50,000 hours. GU10 LED lamps are widely used in illumination of the interior, they oc-broadcast: offices, windows, hallways, bathrooms, offices, as well as in furniture manufacture.
LED lamps for plants:
Plants need a certain spectrum of light for photosynthesis, which depends on their rapid growth. But under natural illumination SRI is not every plant gets the necessary quality
and quantity of my luminous flux, so a series of LED lamps for plants and functions as the sun provides plants with a luminous flux of a certain wavelength in the correct proportions. LED lamps for plants combine two wavelengths, consisting of 8 units of red light and one of the blue.
LED spotlights:
LED spotlights are ideally suited for installation in suspended ceilings and the tension in the closed compartments with poor ventilation, in wooden houses, swimming pools and bathrooms, offices and warehouses. Low power consumption, high luminous efficacy and safety in combination with a prolonged service life and universalnos-Tew makes the product highly attractive segment of the general lighting.
T8 LED tube:
T8 tubes differ midget emoy power consumption: less than 10 W for 60 cm and less than 20 watts for the 120 cm tubing. Lamps have a G13 base, and are designed to operate at a voltage of 110 V or 220 V. Designed to replace the corresponding T8 fluorescent lamps. In comparison with the latter, a light-diode linear T8 lamps use less power, and their effectiveness, by contrast, is much higher. However, they have the sameappearance.
Advantages of LED bulbs:
lack of infrared and ultraviolet radiation;
big saving power consumption and high efficiency;
ten times longer than traditional light sources;
High mechanical strength and stability;
Operating temperature range from -60 ° to 40 ° C;
bezinertsionnost on / off at any temperature;
less blinding effect, a complete lack of flicker;
return on investment, energy savings and cost operation.
